| Uploader: | Taukus |
| Date Added: | 23 June 2012 |
| File Size: | 36.63 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 62332 |
| Price: | Free* [*Free Regsitration Required] |
The basic functions and concepts described above may seem simple; however, they can gpiv invaluable in troubleshooting and getting your GPIB system up and running. Once you have determined the GPIB address of your instruments, it is easy to establish communications to verify that you can send and receive data to and from the instrument.
Instruments must be powered on and connected to the GPIB controller to be recognized.
This verification process automatically occurs when you either run the utility or refresh the list of devices. Now from the viRead tab, select a count ofthe length of your expected response, and then click Execute to return an identification string.
One of the following should occur:. You have just confirmed communication with your instrument. Unfortunately, engineers sometimes forget to reconnect all the cables and power up all the instruments. In addition to manually configuring the network parameters, you can use the Ethernet Device Configuration utility for any of the following purposes:. Connect the other end to your GPIB instrument. If it is not, then you know to check cables, confirm power, and verify that the instrument is working properly.
The hostname associates a name with a numerical IP address. Because most instruments are compliant with Exit when you are finished using the Ethernet Device Configuration utility. Connect the other end of the Ethernet cable to your Ethernet network. This indicates that you should check for loose or disconnected cables, power disruption, or a malfunctioning instrument. Once you have completed these steps, you need a fast way to progress from interactive mode to programming mode so you can immediately begin writing your tests without a tedious transition process.
Select the one that best fits your situation. The current hostname is displayed. If your network uses DHCP, the wnet configuration is performed automatically at startup, and you do not need to run this utility unless you want to change the hostname.
Once your computer restarts to complete the installation of the NI If your subnet mask is You need this information when you run some of the utilities.
National Instruments GPIB-ENET / GPIB-ENET/100 Ethernet GPIB Controller
This is especially important for large systems enef many instruments. You can repeat this process to confirm communication with all of your connected instruments.
This is indicated by an exclamation point! If you select Obtain an IP address automatically DHCPyou do not need to enter any network parameters unless you want to change the hostname of the Ethernet device.
Run the Ethernet Device Configuration Utility. Configuration in Windows for USB.
National Instruments GPIB ENET Ethernet to GPIB Controller | eBay
Locate the device that has a problem. View the properties for the device. The best way to achieve this is by using instrument drivers. This menu displays the list of supported hardware for the installed version of NI Hostname is a required field.
It makes GPIB instrument detection and control easy by providing tools that help you search for connecting instruments, and send and receive communication with your device.
Contact your network administrator to determine whether your network supports DHCP or if you need to manually perform the Ethernet configuration to set up the network parameters. Alternatively, system power may be disrupted for a variety of reasons or the actual instrument may begin to malfunction.
Comments
Post a Comment